TCS- Series Ceramic Saddles
TCS- Series Ceramic Saddles
Drying in industries like chemical and fertilizer. Rectifying and absorbing of columns in producing acetic acid. Cooling and scrubbing of towers. Degassing, liquid extraction, water treatment, heat transfer in Petroleum Chemical,Gas, Environmental area
Key words:
Category:
Catalyst Carrier & Support Media
TCS- Series Ceramic Saddles
Description
TCS-Ceramic Saddles Tower Packing (Alumina:17%~70%) is highly suitable for the conditions of higher temperature and lower temperature and can be much more resistant to all kinds of organic acid, inorganic acid and solutions except for the hydrofluoric acid than metal packing. It is widely used in drying tower, absorbing tower and cooling tower in the fields of chemical, petrochemical,Coal gas etc industries.
■Application:
Drying in industries like chemical and fertilizer.
Rectifying and absorbing of columns in producing acetic acid.
Cooling and scrubbing of towers.
Degassing, liquid extraction, water treatment, heat transfer in Petroleum Chemical,Gas, Environmental area
■ Cearmic Saddle (Alumina 17~23%)
Chemical analysis
| SiO2 | >69% |
| Al2O3 | 17-23% |
| Fe2O3 | <1.50% |
| CaO | <0.5% |
| MgO | <0.5% |
| K2O+Na2O | 2-4% |
| Other | <1% |
Physical properties
| Nominal size(inch) | 1/2’’ | 3/4’’ | 1’’ | 1.5’’ | 2’’ | 3’’ |
| Nominal size(inch) | 286000 | 130000 | 56000 | 12000 | 7300 | 2370 |
| Package density (kg/m3) | 800 | 680 | 620 | 580 | 560 | 530 |
| Free volume (%) | 66 | 71 | 74 | 75 | 76 | 77 |
| Surface area (m2/m3) | 630 | 350 | 250 | 180 | 120 | 90 |
| Packing Factor (m-1) | 663 | 490 | 314 | 160 | 133 | 70 |
| Specific gravity (g/cm3) | 2.3~2.4 | |||||
| Water absorption (%) | <0.5 | |||||
| Acid resistance (%) | >99.6 | |||||
| Max operating temp.℃ | 1100 | |||||
| Softening point,℃ | 1400 | |||||
| Moh’s hardness (scale) | 6.5-8 | |||||
| Thermal conductivity(w/m.k) | 0.9-1.0 | |||||
| Specific heat (j/kg℃) | 840-900 | |||||
Dimensional tolerance (Standard by: GB/T 18749-2008 )
1. Dimensional accuracy
Each batch saddles, 80% of ceramic saddles, the dimensions for average outer diameter and the average height within 5% difference from the required standard size and 100% of ceramic saddles are within 10% difference.
2. Each batch saddles, the number of unqualified dimension should be less than 10%. And the cracks should be less than 5%.
3.The drawing of saddle
4. The main dimension and tolerance
Remark: Other sizes and shapes are available upon requests.
■Packaging:
By standard woven bag, other package like steel drum, jumbo-bag etc are available upon requests.
Prev
Prev
TEL:+86-533-520-7913
E-Mail:amy@tecera.com.cn
ADD:Shuang yang Town,Zichuan Dist. Zibo City,Shandong,China.